NXT-1R - KERI - PROXIMITY READER

NXT-1R

€120.00
(TAX excluded)

NXT Readers provide a number of advantages over traditional Wiegand-output readers:They communicate via RS-485, and so are supervised by the controller so that you always know their status Cabling distance from the controller is doubled – up to 1000 ft (300m) – providing more flexibility in installation Installers are able to use shielded Cat5/6 cable, thus reducing the cost of installation Readers can be configured to read either NXT or HID cards

Add to favorites

 

Security policy (edit with module Customer reassurance)

 

Delivery policy (edit with module Customer reassurance)

 

Return policy (edit with module Customer reassurance)

NXT Readers provide a number of advantages over traditional Wiegand-output readers:They communicate via RS-485, and so are supervised by the controller so that you always know their status Cabling distance from the controller is doubled – up to 1000 ft (300m) – providing more flexibility in installation Installers are able to use shielded Cat5/6 cable, thus reducing the cost of installation Readers can be configured to read either NXT or HID cards NXT Readers can be ordered as “In” or “Out” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Out” readers, specify model numbers with an E at end of model number (i.e., NXT-3RE). They can now be configured to read HID 125 KHz cards and tags, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board. When readers are configured for HID-reading, 26 bit Wiegand compatibility is built into Doors.NET Standard Edition Software and is supported by both standard NXT and Mercury Powered NXT firmware. For other Wiegand formats, customers must use Doors.NET Professional Edition and Mercury Powered firmware, which enables the Credential Types function and its Format Builder and Library. NXT Readers shipped after November 2015 have the ability to be flashed to read HID cards and are designated by an “F” at the end of the serial number.